Description
Male Charging Connector for Scooter Batteries OKAI ES200G
Please read the description carefully.
Shipping to Lower 48 USA states only via UPS Ground. No international shipping. Non-USA customers click here.
These are the male charging battery connectors you need for your OKAI ES200G scooter battery modules to connect your charger to your scooter batteries. Charging via this cable allows the BMS to use overcharge protection.
- 4-pin Ebike battery connector
- 2+2 pin main power and signal connectors
- Cable length is 4 inches (10cm)
- Rated 48v
- Rated 10A
- IP66 dust/water-resistant
You can use these connectors to help “wake up” the JAG35 scooter battery modules.
>> Check out our ACTIVATING DONGLE with charging cables, coming soon!
Technical Specs
Characteristics
Cable Length: 10cm (4 inches)
| Rated Voltage | 48V |
| Rated Current | 10A |
| Withstanding Voltage | 700V |
| Insulation Resistance | ≥20MΩ |
| Contact Resistance | ≤10mΩ |
| Mating Type | Insertion Force:80N Max, Extraction 30N Min |
| Mating Cycles | 200Times |
| Operation Temperature | -25℃~+80℃ |
| Protection Degree | IP66 |
| External Diameter | 9.2mm |
| Mating Length | 62mm |
| Contact Material | Copper alloy plated with gold which conforms to military standard |
| Wire Section | 0.82mm²+0.2mm² |
____
These items are sold for DIY and Second Life purposes. Listings that are “untested” as sold as-is and cannot be returned, exchanged or refunded. Even when sold as “new”, “NOS”, or “like-new”, they may be in less than perfect condition.
If you buy a product from us and then realize you don’t have, or don’t want to acquire, the tool(s) or information needed to make our product(s) work for your specific build, this does not constitute valid grounds for replacements, exchanges or refunds. You are responsible for doing your due diligence before making any purchases.
